Ontario Regulations 1077 & 275/11 - Sheet Metal Worker

[Admin]

Download Ontario Regulation 1077 and Ontario Regulation 426/12 - Here

Note: April 8, 2013 has been named by proclamation as the day on which paragraph 2 of section 103 of the Ontario College of Trades and Apprenticeship Act, 2009 comes into force.

Ontario Regulation 275/11 has been added to the above link.  See Section 40, Sheet metal worker.

40.  (1)  The scope of practice for the trade of sheet metal worker includes the following:
   1.   Manufacturing or fabricating all ferrous and nonferrous sheet metal work of No. 10 U.S. Gauge or any equivalent or lighter gauge and all other materials used in lieu of it. 
   2.   Assembling, handling, erecting, installing, dismantling, reconditioning, adjusting, altering, repairing or servicing all ferrous and nonferrous sheet metal work of No. 10 U.S. Gauge or any equivalent or lighter gauge and all other materials used in lieu of it.
   3.   Reading and interpreting all shop and field sketches used in fabrication and erection, including those taken from sketches or original architectural and engineering drawings.
   4.   Fabricating or installing metal cladding over insulation.  O. Reg. 275/11, s. 40 (1).
   (2)  The scope of practice for the trade of sheet metal worker does not include work listed in subsection (1) that is performed in production commonly known as mass production.  O. Reg. 275/11, s. 40 (2).

The OCOT has released a Residential (Low Rise) Sheet Metal Installer Apprenticeship Training Standard.