The Director of Ontario Regulation 212/01 (Gaseous Fuels) pursuant of section 6 of Ontario Regulation 223/01 (Codes and Standards Adopted by Reference) hereby provides notice that the Gaseous Fuels Code Adoption Document published by the Technical Standards & Safety Authority, dated June 1, 2001 and amended on June 15, 2007, is further amended as follows:
1. Section 1.28 is revoked and the following substituted for it:
1.28 Clause 8.9.6 is revoked and the following substituted for it:
8.9.6 (a) Until October 1, 2008, vents constructed using plastic piping shall be certified to ULC S636 except for special fittings (non standard venting systems and components), which may include:
a. entire vent systems supplied with the appliance that are not comprised of standard vent sizes and components;
b. transitions with or without condensing lines; and
c. termination kits.
8.9.6 (b) After October 1, 2008, venting systems constructed using plastic piping shall be certified to ULC S636.
